©2017 Comnat Inc.
Polymer Concrete Polymer concrete is like ordinary concrete except that is uses a reactive resin as a binder instead of portland cement and water.  The resin can be epoxy, novolac epoxy, furan, or vinylester.  Polymer concretes are primarily used in very corrosive environments where normal concrete and protective coatings will quickly deteriorate and degrade.  The resin binder used is typically highly corrosion resistant.  Another reason polymer concretes are used is because they have extremely fast turnaround time and high physical strengths.  Turnaround time is generally 6 hours from pour time to cured where form work can be stripped and it can be open to traffic.   Compressive strength is over 15,000 psi.  Impact and abrasion resistance is also exceptional. Advantages: High Chemical Resistance - several different resin types High Impact and Abrasion Resistance Quick Turnaround Time - ready for service in 6 hours
Machinery Grout Machinery grout is much like polymer concrete except that it is typically more fluid and is available in epoxy resin base.  It has very high impact, tensile compressive strengths.  It is typically used to provide uniform support for heavy equipment such as tanks, pump bases and support pedestals. It is fluid to allow it to flow easily and self-level under pre-set base plates. Cure times and turnaround time is very fast. Rezklad Machinery Grout -Dry Pack is a dry pack formulation for situations where forming and pouring material is not required or not practical.
©2017 Comnat Inc.
Polymer Concrete Polymer concrete is like ordinary concrete except that is uses a reactive resin as a binder instead of portland cement and water.  The resin can be epoxy, novolac epoxy, furan, or vinylester.  Polymer concretes are primarily used in very corrosive environments where normal concrete and protective coatings will quickly deteriorate and degrade.  The resin binder used is typically highly corrosion resistant.  Another reason polymer concretes are used is because they have extremely fast turnaround time and high physical strengths.  Turnaround time is generally 6 hours from pour time to cured where form work can be stripped and it can be open to traffic.   Compressive strength is over 15,000 psi.  Impact and abrasion resistance is also exceptional. Advantages: High Chemical Resistance - several different resin types High Impact and Abrasion Resistance Quick Turnaround Time - ready for service in 6 hours
Machinery Grout Machinery grout is much like polymer concrete except that it is typically more fluid and is available in epoxy resin base.  It has very high impact, tensile compressive strengths.  It is typically used to provide uniform support for heavy equipment such as tanks, pump bases and support pedestals. It is fluid to allow it to flow easily and self-level under pre-set base plates. Cure times and turnaround time is very fast. Rezklad Machinery Grout -Dry Pack is a dry pack formulation for situations where forming and pouring material is not required or not practical.